Pearl Paint Protection UK - Fabric Hood Protector

Fabric Hood Protector

Pearl Fabric Hood Protector provides an outstanding invisible barrier against natural and manufactured substances to ensure the cabriolet hood stays in first class condition.Suitable for All Fabric Hoods: Pearl Fabric Hood Protector provides a unique protective coating to each individual fabric fibre, sealing the fibres and forming a virtually impregnable invisible protective film.Ideal For Heavy Use Areas:  Pearl Fabric Hood Protector will not only protect surface from substances, but allows for easy aftercare, maintains showroom appearance and extends fabric lifetime.

Non-Hazardous Ready to Use Formula: Pearl Fabric Hood Protector water based non- aerosol technologically advanced formulation makes application and handling both easier and safer. Ideal for all car soft tops, fabric hoods, convertibles and boat canopies.

Directions: Ensure fabric surface is clean and dry before application. To check colour fastness, try on an inconspicuous area first. Apply using a low pressure sprayer only and ensure device is spraying product evenly before application (not too thick or thin and spray pressure should not exceed 4 bar). Spray two light applications on to target surface in a crosswise manner, first horizontally and the vertically to ensure even coverage. Do not saturate fabric.

For maximum protection ensure hood protection is completely dry and allow to fully cure for 4 hours. Introduction of warm air or when applied in hot climates will significantly accelerate the drying process and shorten curing time.

Application advice: When spraying in a confined area such as a small garage ensure all doors and windows are fully open to enable free air flow ventilation. If excessive airborne spray is likely to occur a standard particulate face mask should be worn.